Hood Type, DIN 10512 and A0 60 compliant 504150

Hood Type Dishwasher, with double skin insulated manual hood, guaranteed rinse system (Active), advanced filtering system, built-in detergent and rinse aid dispenser and drain pump, complies with DIN 10512 and EN 15883-1 standards reaching A0 60 disinfection level, 80r/h

Where to buy
  • Features
  • Specifications
  • Documents
  • Built-in ACTIVE Guaranteed Rinse System is sized to raise water temperature to a minimum of 90°C for sanitizing rinse. No external boiler is required. Built-in air break and rinse booster pump ensure constant temperature and pressure throughout the rinsing cycle regardless of the inlet water condition.

  • 45/84 second cycles is certified according to DIN 10512 standard. While 320 second cycle complies with A0 60 level according to EN 15883-1 standard which includes final pause to improve the drying result to avoid water residuals on the washed wares.

  • Maximum capacity per hour of 80 racks or 960 dishes.

  • High efficiency air gap (class A) in water inlet circuit to avoid water being siphoned back contaminating the network is compliant with EN 61770 standard, WRAS, Belgaqua back-flow prevention requirements.

  • Advanced Filtering System provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.

  • Performance is certified for disinfection level according to DIN 10512 standard (1st and 2nd cycle) and complies with A0 60 level according to EN 15883-1 standard (3rd cycle as Disinfection cycle).

  • Unique temperature interlock guarantees required temperatures in both the wash and final rinse in case of emergency cold water feeding.

  • Slanted wash arms and sloped ceiling to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.

  • Incorporated Soft Start feature to offer additional protection to more delicate items.

  • Built-in rinse aid and detergent dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.

  • Three phase electrical connection, convertible to single phase on-site.

  • State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.

  • Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.

  • IP25 protection against water jets, solid objects and small animals (larger than 6 mm).

  • Pressed tank in front position to facilitate cleaning.

  • Specially designed Stainless steel wash/rinse arms and nozzles provide superior cleaning action.

  • Revolving interchangeable Stainless steel wash/rinse arms above and below the rack, screw out for simple clean up.

  • Pre-arranged for on-site HACCP implementation and Energy Management device.

  • Double skin insulated hood.

  • Heavy duty Stainless steel construction. Internal cavity as well as exterior panels are in 304 series Stainless steel.

  • Unit to include drain pump, detergent and rinse aid dispenser pumps.

  • Element protection from dry fire and low water.

  • Supply voltage: 400 V/3N ph/50 Hz
  • Convertible to: 230V 1N~; 230V 3~
  • Default Installed Power: 9.9 kW
  • Boiler Heating Elements Power: 9 kW
  • Tank heating elements: 3 kW
  • Wash pump power: 0.8 kW
  • Drain line size: 20.5mm
  • Inlet water supply pressure: 0.5-7 bar
  • Min hot rinse water consumption per cycle (lt)**: 2
  • Boiler Capacity (lt): 12
  • Tank Capacity (lt): 24
Air Emission:
  • Latent heat: 500 W
  • Sensible heat: 2000 W
  • Water supply temperature*: 10-65 °C
  • Noise level: <63 dBA
Key Information:
  • N° of cycles: 3
  • Duration cycle:* 45/84/320 sec.
  • Racks per hour:* 80
  • Dishes per hour:* 960
  • Wash temperature: 71-77 °C
  • Rinse temperature: 90 °C
  • External dimensions, Width: 752 mm
  • External dimensions, Depth: 755 mm
  • External dimensions, Height: 1567 mm
  • Net weight: 117 kg
  • Shipping weight: 129 kg
  • Shipping volume: 1.23 m³
  • Packaging size

    (WxDxH): 667x755x1567 mm

  • * According to market standard, the productivity is declared at an inlet water supply temperature of 50°C.
  • ** Hot rinse water consumption of 3rd cycle is 4.5lt/cycle.
CAD Drawings
(94,45 KB)
Data Sheet
(684 KB)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now


Compare Products (0/4)