Floor surface on which the cold room will be placed should be levelled if presenting irregularities or unevenness up to 1 cm.

New vacuum injection foaming allows significant and enhanced insulation and higher quality.

Airtight panels connection, all sides of panels have PVC gasket foamed in place to assure airtight and secure fitting; any other sealing between panels on site is eliminated.

Semi recessed door saving space on the external side.

Newly designed handle complete with lock and interior safety release to prevent entrapment when the door is accidentally locked from outside.

Defrosting through heated gas with re-evaporation of defrosting water permits to reduce the total power installed, shorten defrosting time and limit the warming of the cold room. Dedicated drain hole is not needed.

Temperature controller with touch panel.

Control panel includes: luminous ON/OFF switch, internal light switch, cold room functioning indicator, defrost cycle indicator, temperature and thermostat control with digital display.

The unit is ready to be connected with OnE Connectivity for 24/7 real time monitoring, increasing equipment uptime, maximum profit and optimizing your process.

Conform to ruling European safety and hygiene standards and CE marked.

Panels are cladded inside and outside with anti-scratch galvanized plastified steel with 120 micron nontoxic pvc coating, polyurethane foam insulation, CFC and HCFC free.

Whenever the cold room door is opened the microswitch switches on automatically the internal light and turns off the cooling fan.