Dishwashing
Single rinse Rack Type dishwasher with Energy Saving Device and Medium dryer, 100rack/hour, Electric
Single rinse rack type dishwasher with Energy Saving Device and Medium Dryer, 100 racks/hour, electric, touch screen, insulated doors, customized direction on-site
- Features
- Specifications
- Documents
-
Electronically controlled to optimize drying results.
-
Drying zone removes most of water from the crockery through a high powered fan that extracts dry air from outside mixing it with the internal air, thus providing dry plates at a temperature cool enough to handle safely.
-
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
-
Adjustable feet for full access underneath the machine for cleaning.
-
Intuitive touch screen control panel features user-friendly display to easily operate the machine and to monitor machine status. Three different levels of interaction are available each show relevant messages and information to the operator, the general maintenance staff and the authorized service partners.
-
All internal components: wash and rinse arms, tank filters, curtains can be easily removed for cleaning.
-
Unit equipped with USB port making it simple to read data such as machine identification, counters and consumption, components, devices and alarm logs. Machine parameters can be uploaded and downloaded and firmware updated.
-
One conveyor speed can be selected through the control panel by the operator.
-
Large counter balanced inspection door allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
-
Maximum capacity per hour of 100 racks.
-
All main components made in heavy duty anti-corrosive 304 type stainless steel: internal chamber, external, front and side panels and rack transportation system.
-
The unit is built on modularity concept for easy to install on-site.
-
The feeding direction is right to left as pre-arrangement from the factory, but it can be simply reversed on-site to left to right.
-
The chamber is pressed with fully rounded corners without internal pipes and therefore no hidden dirt traps.
-
External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit.
-
All electric components are put in one IP65 central box isolated from water and steam to ensure high reliability.
-
Dishwasher structure is held together with a solid 50 x 50 mm stainless steel frame to provide long-term sturdiness.
-
Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage in just a few minutes. With no welding points the pressed tank offers a guaranteed water tight solution.
Air Emission:
- Air humidity: 100 % r.h.
- Latent heat: 13500 W
- Sensible heat: 8300 W
- Air flow: 243 m³/h
- Air temperature (top, exit): 45 °C
- The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.
- This model requires a ventilation hood. Please refer to the attached "Recommended Exhaust Hood Design".
Key Information:
- For transportation purpose only, the depth can be reduced to either 890mm by removing the main switch button or 792mm by removing the control box and the door handle.
- For shipping data, please refer to price list.
- Reference norm used to measure the noise: IEC60335-2-58 annex AA.
- Height with door open: 2095 mm
- Charging hole size (width): 530 mm
- External dimensions, Width: 1680 mm
- External dimensions, Depth: 920 mm
- Charging hole size (height): 490 mm
- Wash Temperature: 55 - 65 °C
- Table to table distance: 1680 mm
- Productivity per hour (max speed): 100racks/1800dishes
- Dryer air flow: 540 m³/h
- Dryer air temperature: 50-70 °C
- Final rinse temperature: 85 °C
- Drying fan capacity: 540 m³/h
Sustainability
- Rinse water consumption at max. speed (l/h): 150
- Noise level:
- Rinse water consumption at max. speed (l/rack)*: 1.5
Water:
- The higher the temperature, the faster the warm up. Recommended temperature of 50°C.
- When below 7°fH/4°dH special detergent and rinse aid are needed.
- Inlet hot water line size: G 3/4"
- Inlet cold water line size: G 3/4"
- Drain line size: 50mm
- Inlet water supply pressure: 1.5-7 bar
- Inlet Water Supply temperature (rinse): 10 - 30 °C
- Inlet water supply temperature (wash and rinse): 10 - 65°C
- Inlet water supply hardness: 0-14 °fH / 0-8°dH
- Flow rate of wash pump: 400 l/h
- Peak rate of drain flow: 2.5 l/s
- Wash tank size: 70 l
Electric
- Supply voltage: 380-415 V/3N ph/50 Hz
- Default Installed Power: 30 kW
- Boiler heating elements: 12 kW
- Wash pump size: 1.18 kW
- Wash tank heating elements: 12 kW