Warewashing
Hood Type Dishwasher, Manual with Advanced Filtering System & Detergent Dispenser 504275

Hood type dishwasher, with double skin insulated manual hood, guaranteed rinse system (Active), advanced filtering system, built-in rinse aid dispenser, detergent dispenser and drain pump, WRAS approved, 80r/h

Where to buy
  • Features
  • Specifications
  • Documents
  • 45/84/150 seconds cycles (High productivity mode); 57/84/150 seconds cycles (NSF/ANSI 3 mode).

  • Maximum capacity per hour of 80 racks or 1.440 dishes (High productivity mode) easy to switch to 63 racks or 1.134 dishes (NSF/ANSI 3 mode) by pressing a button.

  • NSF/ANSI 3 and DIN 10512 compliant.

  • Green light of Guaranteed Rinse System (ACTIVE) confirms that items have been rinsed properly.

  • Advanced Filtering System provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.

  • CLEAR BLUE advanced filtering system provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.

  • Built-in atmospheric boiler sized to raise incoming water to a minimum of minimum 84 °C for sanitizing rinse. No external booster is required. Constant temperature of 84 °C throughout the rinsing cycle regardless of the network's water pressure.

  • Unique temperature interlock guarantees required temperatures in both the wash and final rinse in case of emergency cold water feeding.

  • Incorporated Soft Start feature to offer additional protection to more delicate items.

  • Slanted wash arms and sloped ceiling to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.

  • Cycle may be interrupted at any time by lifting the hood.

  • Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.

  • State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.

  • Built-in rinse aid and detergent dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.

  • Boiler power setting from control panel to facilitate technician's operation when reducing total installed power, thus avoiding the need of machine opening.

  • Three phase electrical connection, convertible to single phase on-site.

  • IP25 protection against water jets, solid objects and small animals (larger than 6 mm).

  • Heavy duty Stainless steel construction. Internal cavity as well as exterior panels are in 304 series Stainless steel.

  • Pressed tank in front position to facilitate cleaning.

  • Double skin insulated hood.

  • Specially designed Stainless steel wash/rinse arms and nozzles provide superior cleaning action.

  • Revolving interchangeable Stainless steel wash/rinse arms above and below the rack, screw out for simple clean up.

  • Pre-arranged for on-site HACCP implementation and Energy Management device.

  • Element protection from dry fire and low water.

  • Unit to include drain, detergent and rinse aid dispenser pumps

Electric
  • Supply voltage: 400 V/3N ph/50 Hz
  • Convertible to: 230V 1N~; 230V 3~
  • Default Installed Power: 9.9 kW
  • Reducible Installed Power:* 6.9 kW
  • Boiler Heating Elements Power: 9 kW
  • Boiler Reducible To:* 6 kW
  • Tank heating elements: 3 kW
Key Information:
  • N° of cycles: 3
  • Duration cycle:* 45/84/150 sec.
  • Duration cycle - NSF/ANSI 3 compliant: 57/84/150 sec.
  • Racks per hour:* 80
  • Racks per hour - NSF/ANSI 3 compliant: 63
  • Dishes per hour:* 1440
  • Dishes per hour - NSF/ANSI 3 compliant: 1134
  • Wash temperature: 55-65 °C
  • Wash temperature - NSF/ANSI 3 compliant: 75 °C
  • Rinse temperature: 84 °C
  • Net weight: 117 kg
  • Shipping weight: 132 kg
  • Shipping volume: 1.23 m³
  • Packaging size

    (WxDxH): 920x770x1730 mm

  • * According to market standard, the productivity is declared at an inlet water supply temperature of 50°C . If the water is supplied at 65°C, the power can be reduced by 3 kW without any loss in productivity.
  • ** When connected to cold water, the cycle time will be prolonged accordingly. The machine will have productivity per hour of 48 racks at 10°C supply temperature or 55 racks at 20°C supply temperature.
Air Emission:
  • Latent heat: 500 W
  • Sensible heat: 2000 W
Water:
  • Water supply temperature*: 10-65 °C
  • Drain line size: 20.5mm
  • Inlet water supply pressure: 0.5-7 bar
  • Water consumption per cycle (lt): / 2
  • Boiler Capacity (lt): 12
  • Tank Capacity (lt): 24
Sustainability
  • Noise level: <63 dBA
Brochures
(2,28 MB)
CAD Drawings
(113,19 KB)
Data Sheet
BIM/Revit
(996 KB)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

Compare Products (0/4)