Modular Cooking Range Line
EVO900 2-Burner Gas Boiling Top 392000
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
The two 6 kW high efficiency flower flame burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers.
• 60 mm burners with continuous power regulation from 1,5 to 6 kW
• 100 mm burners with continuous power regulation from 2.2 kW to 10 kW
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Burners with optimized combustion.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
The special design of the control knob system guarantees against water infiltration.
IPX5 water protection.
Pan supports in stainless steel.
Unit is 900mm deep to give a larger working surface area.
All exterior panels in Stainless Steel with Scotch Brite finishing.
AISI 304 stainless steel worktop, 2mm thick.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
- Gas Power: 12 kW 40908 Btu/hr
- Standard gas delivery: Natural Gas G20 (20mbar)
- Gas Type Option: LPG;Natural Gas
- Gas Inlet: 1/2"
- Front Burners Power: 6 - kW
- Back Burners Power: 6 - 0 kW
- Back Burners Dimension - mm Ø 60
- Front Burners Dimension - mm Ø 60
- Net weight: 43 kg
- Shipping weight: 34 kg
- Shipping height: 520 mm
- Shipping width: 460 mm
- Shipping depth: 1020 mm
- Shipping volume: 0.24 m³
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.