Modular Cooking Range Line
EVO900 Electric Cylindrical Boiling Pan 60lt 392233
60-lt electric boiling pan with pressure switch, indirect heating
- Features
- Specifications
- Documents
-
Lid and cooking vessel in stainless steel. Sides of vessel with satin finishing for easy cleaning.
-
Minimum load for correct funtioning is 20 liters.
-
Round kettle is suitable to cook, sauté or poach all kinds of produce.
-
Produce is uniformly heated in the base and side walls of the kettle by an indirect heating system that uses integrally generated saturated steam at a temperature of 110° C in the jacket.
-
Incoloy armoured elements with safety thermostat positioned in the jacket cavity base.
-
External valve allows to manually evacuate excess air accumulated in the jacket during heating phase.
-
Appliance is IPX5 water resistance certified.
-
Manometer allows to correctly control the functioning of the pan.
-
Energy regulation through a control knob.
-
Safety thermostat protects against low water level.
-
Safety valve avoids overpressure of the steam in the jacket.
-
No overshooting of cooking temperatures, fast reaction.
-
Large capacity food tap enables safe and effortless discharging of contents.
-
Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.
-
Discharge tube and tap are very easy to clean from outside.
-
Solenoid valve to refill with hot and cold water.
-
Smooth large surfaces, easy access for cleaning.
-
The special design of the control knob system guarantees against water infiltration.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Electric
- Supply voltage: 400 V/3N ph/50/60 Hz
- Total Watts: 9.4 kW
- Predisposed for: 380-400V 3N~ 50/60Hz 8,5-9,4kW
Key Information:
- Pan useful capacity: 60 lt
- Vessel (round) diameter: 420 mm
- Net weight: 115 kg
- Shipping weight: 140 kg
- Shipping height: 1180 mm
- Shipping width: 880 mm
- Shipping depth: 1140 mm
- Shipping volume: 1.18 m³
- No clearance needed on rear sides of unit if wall is of non combustible type. If wall is combustible, minimum 50 mm wall clearance should be maintained.
- Certification group: N9PIE