Modular Cooking Range Line
EVO700 Electric Induction Wok HP
- Features
- Specifications
- Documents
Main Features
Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
Suitable for countertop installation.
6mm glass-ceramic cooking surface with a total power of 5 kW.
Indicating lamp for operating zone located on control console.
Induction plate endowed with overheating safety device.
Power to the zone can be set with progressive output i.e. fine regulation at the lower levels and larger progress at the upper levels.
Low heat dissipation to the kitchen.
The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
Automatic pan detection to transfer power only when pan is present.
IPx4 water protection.
Sustainability
This model is compliant with Swiss Energy Efficiency Ordinance (730.02).
Construction
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Key Information:
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Induction compatible pots & pans must be used.
- External dimensions, Width: 400 mm
- External dimensions, Depth: 700 mm
- External dimensions, Height: 250 mm
- Net weight: 20 kg
- Shipping weight: 27 kg
- Shipping height: 540 mm
- Shipping width: 460 mm
- Shipping depth: 820 mm
- Shipping volume: 0.2 m³
- Certification group: N7CIN
- Back Plates Power: 5 - kW
- Back Plates dimensions: Ø 300
Electric
- Supply voltage: 380-400 V/3 ph/50/60 Hz
- Predisposed for: 380-400V 3~ 50/60Hz 4.5-5kW
- Total Watts: 5 kW