- Features
- Specifications
- Documents
Main Features
Control knobs provide smooth, continuous rotation from min to max power level.
Suitable for countertop installation.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
The six 5.5 kW high efficiency flower flame burners allow the flame to adapt to different size pans.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Pan supports in cast iron are washable in a dishwasher.
Burners to feature flame regulator.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
IPx4 water protection.
Construction
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Key Information:
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Net weight: 55 kg
- Shipping weight: 68 kg
- Shipping height: 520 mm
- Shipping width: 820 mm
- Shipping depth: 1300 mm
- Shipping volume: 0.55 m³
- Front Burners Power: 5.5 - 5.5 kW
- Back Burners Power: 5.5 - 5.5 kW
- Middle Burners Power: 5.5 - 0/5.5 - 0 kW
- Certification group: N7CG
- Back Burners Dimension - mm Ø 60 Ø 60
- Front Burners Dimension - mm Ø 60 Ø 60
- Middle Burners Dimension - mm Ø 60 Ø 60
Gas
- Gas Power: 33 kW
- Standard gas delivery: Natural Gas G20 (20mbar)
- Gas Type Option: LPG;Town
- Gas Inlet: 1/2"