Anti-tilt runners accept GN 1/1 containers.

Digital control panel.

Digital control panel with temperature display.

Refrigerated compartment designed to accept GN 1/1 containers.

Adjustable temperature range from -15 °C to -22 °C to suit meat, fish and dairy storage requirements.

Adjustable temperature range from -15 °C to -20 °C to suit meat, fish and dairy storage requirements.

Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.

Combination of doors and drawers to suit any configuration needed, with the possibility to change the configuration on site. Right cooling unit available on request.

Small footprint to fit even in limited environments.

Anti-tilt runners accept GN 1/1 containers.

0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.

Combination of doors and drawers to suit varying needs, with the possibility to change the configuration on site.

Adjustable temperature range from -15°C to -22°C.

Digital control panel.

Digital control panel with temperature display.

Equipped with Airflow system: forced air circulation system for rapid cooling and even temperature distribution within the cell.

Forced air circulation for rapid cooling and an even temperature distribution.

Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.

Freezer compartment designed to accept GN1/1 containers.

Refrigerated compartment designed to accept GN 1/1 containers.

0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.

Digital control panel.

Adjustable temperature range from -15 °C to -22 °C to suit meat, fish and dairy storage requirements.

Adjustable temperature range from -15 °C to -20 °C to suit meat, fish and dairy storage requirements.

Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.

Self closing stainless steel doors (< 90°).

Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.

Frontal and easy access to all components in the cooling unit.

Small footprint to fit even in limited environments.

Adjustable temperature range from -15°C to -22°C.

0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.

Forced air circulation for rapid cooling and an even temperature distribution.

Self closing stainless steel doors (< 90°).

Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.

Adjustable temperature range from -15 °C to -22 °C to suit meat, fish and dairy storage requirements.

Combination of doors and drawers to suit any configuration needed, with the possibility to change the configuration on site. Right cooling unit available on request.

Certified safety CE requirements.

Tropicalized unit.

Digital control panel with temperature display.

Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.

Frontal and easy access to all components in the cooling unit.

Certified safety CE requirements.

Equipped with Airflow system: forced air circulation system for rapid cooling and even temperature distribution within the cell.

Equipped with Airflow system: forced air circulation system for rapid cooling and even temperature distribution within the cell.

Small footprint to fit even in limited environments.

Freezer compartment designed to accept GN1/1 containers.

Tropicalized unit.

Freezer compartment designed to accept GN1/1 containers.

Combination of doors and drawers to suit varying needs, with the possibility to change the configuration on site.

Forced air circulation for rapid cooling and an even temperature distribution.

Removable triple-chamber balloon magnetic gasket to improve insulation and reduce energy consumption and ease of cleaning.

CFC and HCFC free, highly ecological refrigerant type: R290 (ecological gas in foam: cyclopentane). Hydrocarbon refrigerant gas R290 for the lowest environmental impact (GWP=3), to reduce green house and ozone depletion effects.

Removable triple-chamber balloon magnetic gasket to improve insulation and reduce energy consumption and ease of cleaning.

CFC and HCFC free, highly ecological refrigerant type: R290 (ecological gas in foam: cyclopentane). Hydrocarbon refrigerant gas R290 for the lowest environmental impact (GWP=3), to reduce green house and ozone depletion effects.

Fitted with 90 mm thickness of cyclopentane insulation for best insulating performance (thermal conductivity: 0,020 W/m*K) and lowest environmental impact (GWP=3).

Hot gas automatic evaporation of defrost water.

Fitted with 90 mm thickness of cyclopentane insulation for best insulating performance (thermal conductivity: 0,020 W/m*K) and lowest environmental impact (GWP=3).

Hot gas automatic evaporation of defrost water.

Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.

Easy serviceability thanks to the intuitive control panel with access via app.

Integrated RS485 port to facilitate connection to a remote computer and integrated HACCP systems.

Easy serviceability thanks to the intuitive control panel with access via app.

Integrated RS485 port to facilitate connection to a remote computer and integrated HACCP systems.

Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.

Access to all components from the front.

Built-in compressor to suit operating conditions.

Developed and produced in ISO 9001 and ISO 14001 certified factory.

Fault code display.

Interior base with rounded corners, pressed from a single sheet.

Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.

Internal and external doors, front, back and side panels in AISI 304 Stainless steel.

Worktop in AISI 304 Stainless steel with a 50 mm profile.

Pre-arranged for drain-pipe.

Built-in refrigeration unit.

Anti-drip profile on stainless steel worktop edge.

3 compartments with 3 doors.

If needed, working top can be removed for easier handling during installation (in case of narrow doors).

Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.

Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.

Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.

Extractable cooling unit to facilitate maintenance.

IP21 protection index.

Access to all components from the front.

Built-in compressor to suit operating conditions.

Built-in compressor to suit operating conditions.

Access to all components from the front.

Developed and produced in ISO 9001 and ISO 14001 certified factory.

External back panel in galvanized steel.

Fault code display.

Fault code display.

Interior base with rounded corners, pressed from a single sheet.

Pre-arranged for drain-pipe.

Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.

Internal and external doors, front, back and side panels in AISI 304 Stainless steel.

Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.

Mounted on Stainless steel adjustable legs to give 150 mm clearance for ease of cleaning.

Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.

Rounded internal corners for ease of cleaning.

Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.

Worktop in AISI 304 Stainless steel with a 50 mm profile.

Pre-arranged for drain-pipe.

Built-in refrigeration unit.

IP21 protection index.

Anti-drip profile on stainless steel worktop edge.

Rounded internal corners for ease of cleaning.

3 compartments with 3 doors.

Mounted on Stainless steel adjustable legs to give 150 mm clearance for ease of cleaning.

If needed, working top can be removed for easier handling during installation (in case of narrow doors).

Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.

Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.

Anti-drip profile on stainless steel worktop edge.

Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.

3 compartments with 3 doors.

Extractable cooling unit to facilitate maintenance.

IP21 protection index.

External back panel in galvanized steel.

Rounded internal corners for ease of cleaning.

Mounted on Stainless steel adjustable legs to give 150 mm clearance for ease of cleaning.