Unit to have stainless steel feet with height adjustment up to 50 mm.

The four 5.5 kW high efficiency flower flame burners allow the flame to adapt to different size pans.

Control knobs provide smooth, continuous rotation from min to max power level.

Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.

Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.

Pan supports in cast iron are washable in a dishwasher.

Burners to feature flame regulator.

Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.

Protected pilot light.

Base compartment consists of an electric standard oven positioned beneath the base plate. Stainless steel oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed enamelled steel base plate.

Oven thermostat adjustable from 140 °C to 300 °C.

Control knobs provide smooth, continuous rotation from min to max power level.

Unit to have stainless steel feet with height adjustment up to 50 mm.

The four 5.5 kW high efficiency flower flame burners allow the flame to adapt to different size pans.

Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.

Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.

Pan supports in cast iron are washable in a dishwasher.

Burners to feature flame regulator.

Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.

Protected pilot light.

Base compartment consists of an electric standard oven positioned beneath the base plate. Stainless steel oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed enamelled steel base plate.

Oven thermostat adjustable from 140 °C to 300 °C.

Double skinned door with pressed internal panel for heat insulation.

IPx4 water protection.

One piece pressed 1.5 mm work top in Stainless steel.

Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

All exterior panels in Stainless Steel with Scotch Brite finishing.

One piece pressed 1.5 mm work top in Stainless steel.

Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.