Incorporated Soft Start feature to offer additional protection to more delicate items.

Built-in rinse aid dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.

Cycle may be interrupted at any time by lifting the hood.

Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.

State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.

Three phase electrical connection, convertible to single phase on-site.

Unique temperature interlock guarantees required temperatures in both the wash and final rinse in case of emergency cold water feeding.

Built-in atmospheric boiler sized to raise incoming water to a minimum of minimum 84 °C for sanitizing rinse. No external booster is required. Constant temperature of 84 °C throughout the rinsing cycle regardless of the network's water pressure.

Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.

Boiler power setting from control panel to facilitate technician's operation when reducing total installed power, thus avoiding the need of machine opening.

IP25 protection against water jets, solid objects and small animals (larger than 6 mm).

Slanted wash arms to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.

NSF/ANSI 3 and DIN 10512 compliant.

Maximum capacity per hour of 80 racks or 1.440 dishes (High productivity mode) easy to switch to 63 racks or 1.134 dishes (NSF/ANSI 3 mode) by pressing a button.

45/84/150 seconds cycles (High productivity mode); 57/84/150 seconds cycles (NSF/ANSI 3 mode).

Built-in high efficiency Energy Saving Device (ESD) transfers the heat captured inside the machine to the incoming cold water before entering the boiler, thus saving energy; no ventilation hood is needed for the machine (depending on local regulation and conditional on compliance with VDI 2052).

Requires only 2 liters of water per washing cycle thus ensuring low energy, water, detergent and rinse aid consumption.

Element protection from dry fire and low water.

Single skin hood supported by 3 springs to ensure smooth movement and guarantee operator safety.

Heavy duty Stainless steel construction. Internal cavity as well as exterior panels are in 304 series Stainless steel.

Pressed tank in front position to facilitate cleaning.

Specially designed Stainless steel wash/rinse arms and nozzles provide superior cleaning action.

Revolving interchangeable Stainless steel wash/rinse arms above and below the rack, screw out for simple clean up.

Pre-arranged for on-site HACCP implementation and Energy Management device.