Unit to be mounted on stainless steel feet with height adjustment up to 50 mm. Unit can be easily mounted on cantilever systems.

Four 10 kW high efficiency burners are equipped with power regulation from 2.2 kW to 10 kW.

Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.

Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.

Burners with optimized combustion.

Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.

Protected pilot light.

Base compartment consists of a gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate. Oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed cast iron base plate.

40 mm thick oven door for heat insulation.

The special design of the control knob system guarantees against water infiltration.

IPX5 water protection.

EvoFlame model available to save up to 20% on gas >>> 392642 (according to internal test performed in Electrolux Professional R&D Laboratory).

Unit is 900mm deep to give a larger working surface area.

Pan supports in stainless steel.

All exterior panels in Stainless Steel with Scotch Brite finishing.

AISI 304 stainless steel worktop, 2mm thick.

Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.