Go Back
Work Tables without Upstand

Standard Preparation
700 mm Work Table

COD 133216
Electric
Supply voltage: 400 V/3N ph/50 Hz - 380-400 V/3 ph/50/60 Hz
Convertible to: 230V 1N~; 230V 3~ - -
Default Installed Power: 9.9 kW - -
Boiler heating elements: 9 kW - -
Tank heating elements: 3 kW - -
Wash pump size: 0.8 kW - -
Total Watts: - - 16.4 kW
Predisposed for: - - 380-400V 3~ 50/60Hz 14,6-16,4kW
Water:
Water supply temperature*: 10-20 °C - -
Drain line size: 20.5 mm - -
Inlet water supply pressure: 0.5-7 bar - -
Water consumption per cycle (lt): 2 - -
Boiler Capacity (lt): 12 - -
Tank Capacity (lt): 24 - -
Key Information:
N° of cycles: 3 - -
Duration cycle:* 45/84/150 sec. - -
Duration cycle - NSF/ANSI 3 compliant: 57/84/150 sec. - -
Racks per hour:* 80 - -
Racks per hour - NSF/ANSI 3 compliant: 63 - -
Dishes per hour:* 1440 - -
Dishes per hour - NSF/ANSI 3 compliant: 1134 - -
Wash temperature: 55-65 °C - -
Wash temperature - NSF/ANSI 3 compliant: 75 °C - -
Rinse temperature: 84 °C - -
Net weight: 150 kg 26 kg 80 kg
Shipping weight: 117 kg - 93 kg
Shipping volume: 1.23 m³ - 0.76 m³
Shipping volume (ESD): 0.33 m³ - -
Packaging size

(WxDxH):
920x780x1720 mm - -
Packaging size ESD (WxDxH): 730x930x480 mm - -
Shipping weight (ESD): 79 lbs (35 kg) - -
Noise level: <68 dBA - -
* Productivity guaranteed at any supply temperature allowed in the range above. To ensure full energy recovery, an extra 11 seconds is required. - -
External dimensions, Width: - 700 mm -
External dimensions, Height: - 900 mm -
External dimensions, Depth: - 700 mm -
Worktop thickness: - 50 mm -
Front Plates Power: - - 2.6 - 2.6 kW
Back Plates Power: - - 2.6 - 2.6 kW
Front Plates dimensions: - - Ø 230 Ø 230
Back Plates dimensions: - - Ø 230 Ø 230
Oven working Temperature: - - 140 °C MIN; 300 °C MAX
Oven Cavity Dimensions (width): - - 540 mm
Oven Cavity Dimensions (height): - - 300 mm
Oven Cavity Dimensions (depth): - - 650 mm
Shipping height: - - 1080 mm
Shipping width: - - 820 mm
Shipping depth: - - 860 mm
If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted. - -
Certification group: - - EH74O
Air Emission:
Air Flow: 170 m³/h - -
Air temperature: 26 - 29 °C - -
Air humidity: 55% - -
Latent heat: 350 W - -
Sensible heat: 1490 W - -