Modular Cooking Range Line
EVO900 6-Burner Gas Boiling Top 392033
6-burner (4x6 kW, 2x10 kW) gas boiling top - cast iron grids
- Features
- Specifications
- Documents
-
Control knobs provide smooth, continuous rotation from min to max power level.
-
Suitable for countertop installation.
-
The two 6 kW high efficiency flower flame burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers.
• 60 mm burners with continuous power regulation from 1,5 to 6 kW
• 100 mm burners with continuous power regulation from 2.2 kW to 10 kW -
Large sized pan support in cast iron with long center fins to allow the use of the largest down to the smallest pans.
-
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
-
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
-
Burners with optimized combustion.
-
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
-
Protected pilot light.
-
The special design of the control knob system guarantees against water infiltration.
-
IPX5 water protection.
-
Unit is 900mm deep to give a larger working surface area.
-
AISI 304 stainless steel worktop, 2mm thick.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
Gas
- Gas Power: 44 kW
- Standard gas delivery: Natural Gas G20 (20mbar)
- Gas Type Option: LPG;Natural Gas
- Gas Inlet: 1/2"
Key Information:
- Front Burners Power: 6 - 6 kW
- Back Burners Power: 10 - 10 kW
- Middle Burners Power: 6 - 0/6 - 0 kW
- Back Burners Dimension - mm Ø 100 Ø 100
- Front Burners Dimension - mm Ø 60 Ø 60
- Middle Burners Dimension - mm Ø 60 Ø 60
- Net weight: 85 kg
- Shipping weight: 98 kg
- Shipping height: 530 mm
- Shipping width: 1010 mm
- Shipping depth: 1260 mm
- Shipping volume: 0.67 m³
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Certification group: N9CG